Haier HWM65-728 User Manual - Page 13

4 Push the " " button, select suitable water level z After switching on the power, when select the standard program,the washing machine will execute fuzzy program automatically to detect the cloth .After detection, it can set the water level automatically. To select other water level, ¿rst push the "START/PAUSE" button, then push the "WATER LEVEL" button to set the water level. 5 Push the " " button to select suitable delay wash program After switching on the power, the delay time program is set to off mode automatically. If you need to set the washing procedure to be ¿nished at delay time, please push the "DELAY" button to set the delay wash program. Refer to delay button in Page 11 for selection. Con¿rm the operation of "DELAY" program z When the "DELAY" function is activated, the indicator light of the program you have set will be off. The "DELAY (HOURS)" and "REMAIN(MINUTES)" indicator lights will be on. During delay procedure, push the "DELAY" button to display the delay time mode. z To change the running program or cancel the delay time setting, you need to switch off the power and make new selection. 6 Push the " " button 7 Close the top lid If the top lid is opened when the machine is spinning, the machine will stop running and alarm. 8 Finish washing After finishing washing, the washing machine will cut off the power automatically. Disposal after washing z Please ¿rst pull off the power plug from the receptacle before cleaning. z After using, please clean the lint and foreign materials of the lint ¿lter etc. in time. Otherwise it may inÀuence your using the machine. Clean the detergent box and set it on the control panel seat( applicable for the model HWM65-728): 1 The method of dismantle: Push it up aslant and gently. 2 The method of install : install it upwards and aslant and push it in. 13