Haier HWM65-728 User Manual - Page 5
Installation and adjustment
View all Haier HWM65-728 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. After opening the package, please lean the washing machine gently down on soft items (like towel cloth,blanket, etc.). Install the bottom plate to the bottom of the machine with screws by a cross screwdriver, then lift the machine up gently. See to the ¿gure: (Please ¿rst pull off the power plug from the receptacle before installing.) Back Bottom plate Front Screw Carpet The washing machine away from wall should be overrun 20mm. The largest allowable slope of the shank base of the machine is 2°. The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: z Confirm it's horizontal: Hang the lead line to check if it is horizontal. z Adjust the adjustable foot: 1. To twist the adjustable foot, please ¿rst lift up the side of the leg slightly, loosen the adjustable nut, and twist the foot. Please make sure to keep the washing machine in balance. 2. After adjustment, fasten the nut. The adjustable foot 5