Harman Kardon AVR 1710 Owners Manual - Page 22
Set Up the AVR - manual
View all Harman Kardon AVR 1710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
AVR Set Up the AVR Set Up the AVR In this section, you will configure the AVR to match your actual system's makeup. Although it's possible to configure the AVR using only the remote and the messages on the AVR's front-panel display, it is easier if you use the on-screen menu system. Turn On the AVR Press the front-panel Power button. Power Button Before beginning the following setup steps, all loudspeakers, a video display and all source devices should be connected. You should be able to turn on the AVR and view the main menu when you press the AVR button. If necessary, reread the Making Connections and Set Up the Remote sections before continuing. Configure the AVR for Your Speakers 1. Plug the supplied EzSet/EQ microphone into the AVR's Headphone connector. AVR Headphone Connector Using the On-Screen Menu System To access the menu system, press the OSD/Menu button on the remote. The OSD/Menu Menu will appear, and if a video source is playing, the menu will automatically re-size so the picture will be visible behind the menu. EzSet Microphone (supplied) 2. Place the microphone at ear height in your listening position. 3. Set the volume control on your subwoofer to approximately the halfway point. 4. Turn on your TV and select the TV input where you connected the AVR in Connect Your TV or Video Display, on page 15. 5. Press the remote control's AVR button. The AVR's on-screen display (OSD) Main Menu screen will appear on the TV. 6. Use the remote's Up/Down/Left/Right and OK buttons to select "Speaker Setup." NOTE: The actual on-screen menus may differ slightly from the illustrations in this manual. The Main Menu system consists of six submenus: Source Select, Source Setup, Surround Mode, Speaker Setup, Network and System Setup. (The AVR 1710/AVR 171 also have a Zone 2 submenu.) Use the Up/Down/Left/Right buttons on the remote or the front panel to navigate the menu system, and press the OK button to select a menu or setting line, or to enter a new setting. The current menu, setting line or new setting will appear in the front-panel Message Display, as well as on screen. To return to the previous menu or exit the menu system, press the Back/Exit button. Be certain all settings are correct, as any changes you have made will be retained. Most users should follow the instructions in this Set Up the AVR section to configure a basic home theater system. You may return to these menus at any time to make additional adjustments, such as those described in the Advanced Functions section, on page 29. 22