Hayward CAT 6000 CAT 6000 Owners Manual - Page 14

Prepare Tubing, Insert Tubing, To Release Tubing

Get Hayward CAT 6000 PDF manuals and user guides View all Hayward CAT 6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

14. Check all electrical and mechanical connections. Ensure that the Influent and Effluent Flow Valves are open. Ensure that the Sample Stream valve is closed. Resume filtration system operation and check for any leaks. Ensure that the flow meter is spinning, indicating flow. Body O-Ring 13 Collet Prepare Tubing Insert Tubing To Release Tubing Cut tubing squarely Insert tubing straight Push collet toward and remove any into fitting until it fitting body and pull burrs. Mark tubing bottoms out and on tubing to release. 3/4" from end. This insertion mark is no Repeat steps 1 and 2 Tubing is the insertion mark. longer visible. to reuse fitting. USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
13
14. Check all electrical and mechanical connections. Ensure that the Influent and Effluent Flow
Valves are open. Ensure that the Sample Stream valve is closed. Resume filtration system
operation and check for any leaks. Ensure that the flow meter is spinning, indicating flow.
Body
Collet
Tubing
O-Ring
Prepare Tubing
Insert Tubing
To Release Tubing
Cut tubing squarely
and remove any
burrs. Mark tubing
3/4” from end.
This
is the insertion mark.
Insert tubing straight
into fitting until it
bottoms out and
insertion mark is no
longer visible.
Push collet toward
fitting body and pull
on tubing to release.
Repeat steps 1 and 2
to reuse fitting.