Hayward CAT 6000 CAT 6000 Owners Manual - Page 43

Appendix C - Circulation Pump Interlock

Get Hayward CAT 6000 PDF manuals and user guides View all Hayward CAT 6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Appendix C - Circulation Pump Interlock The pump interlock is on pins 3 and 4 of the Pump Interface connector. Pins 3 and 4 should be connected to a dry set of contacts from the pump that are closed when the pump is running. The mating Conxall/Switchcraft connector kit P/N's are as follows depending on wire gauge and jacket O.D. of the cable being used: 6282-4PG-3DC 6282-4PG-311 6280-4PG-321 6282-4PG-513 Please note that before installing mating connector remove the factory installed jumper across pin 3 and 4 with a pair of needle nose pliers. See picture below. 42 USE ONLY HAYWARD GENUINE REPLACEMENT PARTS

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
42
Appendix C – Circulation Pump Interlock
The pump interlock is on pins 3 and 4 of the Pump Interface connector. Pins 3 and 4 should be con-
nected to a dry set of contacts from the pump that are closed when the pump is running.
The mating Conxall/Switchcraft connector kit P/N’s are as follows depending on wire gauge and jacket
O.D. of the cable being used:
6282-4PG-3DC
6282-4PG-311
6280-4PG-321
6282-4PG-513
Please note that before installing mating connector remove the factory installed jumper across pin 3
and 4 with a pair of needle nose pliers. See picture below.