HealthRider H145t Treadmill English Manual - Page 11

8. With the help of a second person, hold the con- sole assembly near the Upright (86). 8 Connect the Upright Wire (79) to the console wire. See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. IF YOU DO NOT CONNECT THE CONNECTORS PROPERLY, THE CONSOLE MAY BECOME DAMAGED WHEN YOU TURN ON THE POWER. Remove the wire tie from the Upright Wire. Console Assembly 79 Console Wire Console Wire 79 86 Wire Tie 9. Set the console assembly on the Handrails (81, 82) and the Upright (86). Be careful not to 9 pinch any wires. Insert the excess Upright Wire (not shown) into the Upright. Attach the console assembly to the Crossbar (not shown) with three #8 x 1/2" Screws (1). Do not fully tighten the Screws yet. 1 82 Console Assembly 1 81 86 11