HealthRider H145t Treadmill English Manual - Page 8
Star Washers 11 into the Upright.
 |
View all HealthRider H145t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
2. Slide the Upright Cover (87) upward onto the Upright (86) as shown. 2 Have a second person hold the Upright (86) near the Base (94). See the inset drawing. Tie the wire tie in the Upright (86) securely around the end of the Upright Wire (79). Then, pull the other end of the wire tie until the Upright Wire is routed through the Upright. Wire Tie 86 Wire Tie Hole 79 3. Hold the Upright (86) against the Base (94). Be careful not to pinch the Upright Wire (79). 3 Insert three 3/8" x 2 3/4" Screws (7) with three 3/8" Star Washers (11) into the Upright. Partially tighten the 3/8" x 2 3/4" Screws (7) until the heads of the Screws touch the Upright (86); do not fully tighten the Screws yet. 86 94 87 Hole 79 86 79 7 94 11 8
-
1 -
2
-
3 -
4 -
5 -
6 -
7 -
8 -
9 -
10 -
11 -
12 -
13 -
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
 |
 |
8
3.
Hold the Upright (86) against the Base (94).
Be
careful not to pinch the Upright Wire (79).
Insert three 3/8" x 2 3/4" Screws (7) with three
3/8" Star Washers (11) into the Upright.
Partially tighten the 3/8" x 2 3/4" Screws (7) until
the heads of the Screws touch the Upright (86);
do not fully tighten the Screws yet.
94
3
86
7
11
79
2.
Slide the Upright Cover (87) upward onto the
Upright (86) as shown.
Have a second person hold the Upright (86) near
the Base (94).
See the inset drawing.
Tie the wire tie in the
Upright (86) securely around the end of the
Upright Wire (79). Then, pull the other end of the
wire tie until the Upright Wire is routed through
the Upright.
86
Wire
Tie
94
Hole
87
86
79
79
Wire
Tie
Hole
2