HealthRider H145t Treadmill English Manual - Page 7
Assembly
View all HealthRider H145t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
ASSEMBLY • Assembly requires two persons. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you nish all assembly steps. • After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, wipe it off with a soft cloth and a mild, non-abrasive cleaner. • Left parts are marked "L" or "Left" and right parts are marked "R" or "Right." • To identify small parts, see page 6. • Assembly requires the following tools: the included hex keys one adjustable wrench one Phillips screwdriver scissors To avoid damaging parts, do not use power tools. 1. Make sure that the power cord is unplugged. Attach the Right Wheel Cap (90) to the Base (94) with two #8 x 3/4" Screws (2). Attach the Left Wheel Cap (not shown) to the Base (94) in the same way. Cut the shipping tie holding the Upright Wire (79) to the Base (94). 1 90 2 94 79 Tie 7