HealthRider H75t Treadmill English Manual - Page 8

Note: If the Bolt A hits

Get HealthRider H75t Treadmill PDF manuals and user guides View all HealthRider H75t Treadmill manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

3. Identify the Right Upright (112), which is marked with a "Right" sticker. Have a second person hold the Right Upright near the Base (85) as shown. See the inset drawing. Tie the wire tie in the Right Upright (112) securely around the end of the Upright Wire (79). Then, pull the other end of the wire tie until the Upright Wire is routed completely through the Right Upright. 3 79 Wire Tie 4. Have a second person hold the Right Upright (112) against the Base (85), with the Right 4 Upright positioned as shown. Be careful not to pinch the Upright Wire (79). Attach the Right Upright (112) to the Base (85) with two 3/8" x 2 1/2" Bolts (10) and two 3/8" Star Washers (9). Note: If the Bolt (A) hits the #8 x 3/4" Screw (1) attaching the Base Cap (86), loosen the Screw several turns. Firmly tighten the 3/8" x 2 1/2" Bolts (10). If necessary, retighten the #8 x 3/4" Screw (1). 112 79 85 112 79 Wire Tie 112 79 86 1 9 A 10 85 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
8
3.
Identify the Right Upright (112), which is marked
with a “Right” sticker. Have a second person
hold the Right Upright near the Base (85) as
shown.
See the inset drawing.
Tie the wire tie in the
Right Upright (112) securely around the end of
the Upright Wire (79). Then, pull the other end
of the wire tie until the Upright Wire is routed
completely through the Right Upright.
3
112
Wire
Tie
79
85
79
4.
Have a second person hold the Right Upright
(112) against the Base (85), with the Right
Upright positioned as shown.
Be careful not to
pinch the Upright Wire (79).
Attach the Right Upright (112) to the Base (85)
with two 3/8" x 2 1/2" Bolts (10) and two 3/8"
Star Washers (9).
Note: If the Bolt (A) hits the
#8 x 3/4" Screw (1) attaching the Base Cap
(86), loosen the Screw several turns.
Firmly tighten the 3/8" x 2 1/2" Bolts (10). If nec-
essary, retighten the #8 x 3/4" Screw (1).
4
10
85
9
112
79
86
A
1
79
112
Wire Tie