HealthRider H75t Treadmill English Manual - Page 9

5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (54) so that the treadmill is more stable. Do not fully fold the Frame until the treadmill is completely assembled. Have a second person hold the Left Upright (111) against the Base (85), with the Left Upright positioned as shown. Attach the Left Upright (111) to the Base (85) with two 3/8" x 2 1/2" Bolts (10) and two 3/8" Star Washers (9). If the Bolt (A) does not slide in easily, see the instructions in step 4. Firmly tighten the 3/8" x 2 1/2" Bolts (10). Attach a Wheel (92) to the Base (85) with a 3/8" x 2 1/4" Bolt (6) and a 3/8" Nut (5). Do not overtighten the Nut; the Wheel must turn freely. With the help of a second person, tip the treadmill so that the Base (85) is flat on the floor. 5 111 85 9 A 10 6. Hold the Right Handrail (107), which is marked with a "Right" sticker, near the console assem- 6 bly. Insert the console wire into the hole in the 107 side of the Right Handrail and out of the hole in the top. Attach the Console Ground Wire (102) to the bracket on the Right Handrail (107) with the #8 x 1/2" Ground Screw (16). Set the Left and Right Handrails (106, 107) on the console assembly. Start two #8 x 3/4" Screws (1) into each Handrail. Do not fully tighten the Screws yet. Be careful not to pinch the console wire. Remove the wire ties from the Left and Right Handrails (106, 107). If necessary, press the Cage Nuts (35) back into place. 1 1 106 35 6 92 5 54 1 Console Wire 35 1 16 102 Console Assembly 9