HP 1606 HP StorageWorks B-series Data Center Fabric Manager Enterprise, Profes - Page 52

Closed fixes summary Solution Zoning activation fails in case the port index greater than 255 is part of the zone Configuration in Interopmode 2. Fixed in DCFM 10.4.0. LSAN zone aliases missing. Fixed in DCFM 10.4.0. No instances listed while executing the EnumerateInstanceNames, EnumerateInstances operations for the class Brocade_HBAFCPortStatistics. Fixed in DCFM 10.4.0. GetInstances operation failed for the class Brocade_HBASCSIProtocolEndPoint with Exception CIM_ERR_NOT_FOUND listing wrong instances as an output for EnumerateInstances operation. Fixed in DCFM 10.4.0. DCFM 10.4.1 fixes Table 5 lists the fixes that were closed for this release. Table 5 DCFM 10.4.1 closed fixes Closed fixes summary Solution In a cascaded FICON configuration, the user is not allowed to enable FMS mode when 256-area limit is disabled for logical switches. A warning message is displayed and the user is prevented from performing the operation. Workaround prior to upgrade: Use the CLI to enable the FMS mode. Fixed in DCFM 10.4.1. Properties with wrong values are returned when a switch with firmware version 6.1.x or earlier is managed with invalid SNMP credentials. User may not be able to retrieve the correct Fabric WWN, switch information like vendor, model and serial number. Zoning operation cannot be performed. Fixed in DCFM 10.4.1. In an FCR environment with encryption, each container may display duplicate entries for each of the LUNs. Fixed in DCFM 10.4.1. When more than one million events are received in a single day, the event purge mechanism may fail and the number of events in the database continues to grow. In this condition, if the user tries to launch the Audit Log dialog, due to a large number of events being retrieved, the server may restart with an out of memory exception. Fixed in DCFM 10.4.1. 52