HP 203039-B21 Console Management Controller User Guide - Page 43
Setting the Subnet Mask, Using the Front Serial Port, Installation Completion
UPC - 720591484798
View all HP 203039-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Installation 2-25 Setting the Subnet Mask Press Scroll Up and Enter/Alarm Silence to set the Subnet Mask address. The default setting is 0.0.0.0. The CMC will automatically reboot. NOTE: For more detailed configuration instructions, see Chapter 4, "Software." Using the Front Serial Port The serial port on the front panel may be used with a laptop computer to configure the CMC. NOTE: For more detailed configuration instructions, see Chapter 4, "Software." Figure 2-24. Connecting to the serial port Installation Completion Installation is now complete. For information on operating the CMC, see Chapter 3, "Operation." Use the Compaq website at www.compaq.com as an additional information source.
Installation
2-25
Setting the Subnet Mask
■
Press
Scroll Up
and
Enter/Alarm Silence
to set the Subnet Mask
address. The default setting is 0.0.0.0.
■
The CMC will automatically reboot.
NOTE:
For more detailed configuration instructions, see Chapter 4,
“
Software.
”
Using the Front Serial Port
The serial port on the front panel may be used with a laptop computer to
configure the CMC.
NOTE:
For more detailed configuration instructions, see Chapter 4,
“
Software.
”
Figure 2-24.
Connecting to the serial port
Installation Completion
Installation is now complete. For information on operating the CMC, see
Chapter 3, “Operation.” Use the Compaq website at
www.compaq.com
as an
additional information source.