HP 203039-B21 Console Management Controller User Guide - Page 68
Press, to Deactivate Relay, Cancel, Return, Device Home
UPC - 720591484798
View all HP 203039-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
4-18 Compaq Console Management Controller User Guide To configure the options: 1. Select whether each fan is installed (available) or not installed (unavailable). 2. Select the appropriate logic for the alarm relays. 3. Enable the Press to Deactivate Relay option to be able to deactivate relay output from the front of the CMC. 4. Select the appropriate options for each lock set. a. Select whether each lock set is installed (available) or not installed (unavailable). b. Select the doors and panels that must be closed before the lock set can activate the lock. IMPORTANT: For the door-locking feature to work properly, you must assign at least one intrusion sensor to each lock set. For more information about configuring intrusion sensors, see "Sensor Setup Screen" in this chapter. c. Set the lock sets to remain locked or to unlock in the event of each listed fault. Enable the concealed door release to press a hidden switch to manually unlock locked doors. NOTE: The software cannot detect the concealed door release. Make sure the concealed door release option is not selected for CMCs that control racks without a concealed door release. 5. After entering the accessory information, click Save to save the changes or click Cancel to cancel the changes. 6. Click Return to view the Device Home screen for this CMC. The Device Home screen is discussed in detail later in this chapter.