HP 203039-B21 Console Management Controller User Guide - Page 64
Device Setup, Press, to Silence Alarm, Cancel, Return, Device Home, Update
UPC - 720591484798
View all HP 203039-B21 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4-14 Compaq Console Management Controller User Guide To configure a CMC: 1. Enter the name, physical location, and contact person for the CMC in the Device Setup box. 2. Select the appropriate display language and temperature unit of measure. 3. Select the audible alarm Off radio button to permanently turn off the audible alarm. 4. Enable the Press to Silence Alarm option to be able to silence audible alarms from the front panel of the CMC. 5. Enter a password specific to this CMC and enable or disable the password functionality. The CMC password can be up to six characters in length. Characters can only be capital letters or numbers. NOTE: If the password is enabled, the password is required to change the CMC IP address and settings using the front panel controls or a terminal program. 6. Edit the SNMP Read/Write Community strings if necessary. CAUTION: The SNMP Read/Write Community strings displayed on the CMC Properties screen must match those on the CMC device. If you edit the strings on this screen, be sure to make the same changes for the CMC device using a terminal program as described in "Terminal Program Operation" in this chapter. 7. After entering the CMC properties, click Save to save the changes or click Cancel to cancel the changes. 8. Click Return to view the Device Home screen for this CMC. The Device Home screen is discussed in detail later in this chapter. To update the MIB, software, and firmware for the CMC, click Update.