HP 2120 HP StorageWorks Disk System 2120 Users Guide (5697-5367, March 2005) - Page 28
STM Disk Information: MPE/iX 6.5 or Later, vsclose, select device, select, device 15, information
View all HP 2120 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
28 HP StorageWorks Disk System 2120 STM Disk Information: MPE/iX 6.5 or Later STM displays the last-generated Information Log for a selected disk. Start STM and run the Information tool as follows. 1 Log on the system. 2 At the system prompt (:), type vsclose . This removes the disk from use. 3 At the system prompt (:), type cstm. STM starts. 4 At the cstm prompt, type map. STM displays a list of all the disks installed on the system. 5 Select the desired disk by typing select device ; for example, select device 15. 6 Type information. STM updates the system map. 7 To display the information log, type infolog. A sample information log is shown in Figure 16.
HP StorageWorks Disk System 2120
28
STM Disk Information: MPE/iX 6.5 or Later
STM displays the last-generated Information Log for a selected disk. Start STM and
run the Information tool as follows.
1
Log on the system.
2
At the system prompt (:), type
vsclose
<physical volume number>. This removes
the disk from use.
3
At the system prompt (:), type
cstm
. STM starts.
4
At the cstm prompt, type
map
. STM displays a list of all the disks installed on the
system.
5
Select the desired disk by typing
select device
<number>; for example,
select
device 15
.
6
Type
information
. STM updates the system map.
7
To display the information log, type
infolog
. A sample information log is shown
in Figure 16.