HP 220mx HP SureStore 9100mx Optical Disk Drive User's Guide - Page 22
Connecting the Drive Using Native Operating System, Drivers
View all HP 220mx manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
NOTE Setting up the Disk Drive Connecting the Drive to Your System Connecting the Drive Using Native Operating System Drivers To use 9.1 Gbyte disks, your operating system must support 4,096 byte-per-sector media. Connection to Windows 98 Ensure that power is applied to the drive before applying power to the host computer. Then do the following steps: 1. Place an optical disk cartridge into the drive. 2. Double click on MY COMPUTER. 3. Right mouse click on the REMOVABLE DISK icon. 4. In the Format dialog box, select FULL under the FORMAT TYPE heading. 5. Under OTHER OPTIONS, enter a disk label name if desired (ex. Backup). 6. Select START. A dialog box displays warning you that a large amount of disk space will be erased. Click OK. 7. Click CLOSE when the FORMAT RESULTS dialog box displays. 8. Close the dialog box. You are now able to read, write, and erase data on your disk. Connection to Windows 2000 Ensure that power is applied to the drive before applying power to the host computer. Then do the following steps: 1. Place an optical disk cartridge into the drive. 2. Double click on MY COMPUTER. 3. Right mouse click on the REMOVABLE DISK icon. 4. In the Format dialog box, select FULL under the FORMAT TYPE heading. 5. Under OTHER OPTIONS, enter a disk label name if desired (ex. Backup). 6. Select START. A dialog box displays warning you that a large amount of disk space will be erased. Click OK. 7. Click CLOSE when the FORMAT RESULTS dialog box displays. 1- 10 Chapter 1