HP 3PAR StoreServ 7200 2-node HP 3PAR Management Console 4.3.1 User's - Page 278

1. In the Manager Pane, click Systems. 2. In the Management Tree, click the system you wish to edit. 3. In the Common Actions Panel, click Edit System. The Edit System dialog box appears. 4. In the General group box, select the following: a. Name - enter a new system name. b. FC Raw Space Alert - Select whether to enable or disable the raw space alert for Fiber Channel drives. If Enabled, enter a value from 100 to 100,000 GiB. c. NL Raw Space Alert - Select whether to enable or disable the raw space alert for Nearline drives. If Enabled, enter a value from 100 to 100,000 GiB. d. SSD Raw Space Alert - Select whether to enable or disable the raw space alert for SSD drives. If Enabled, enter a value from 100 to 100,000 GiB. NOTE: These fields only appear for devices installed on the system. For example, if your system contains no SSD drives, the SSD Raw Space Alert field will not be present. e. To select a Maximum Volume Retention time, select Enabled, select hour(s) or day(s), and then enter a value of 1 to 1,825 (days) or 1 to 43,800 (hours). 5. In the Descriptors group box, enter the following: a. Location - Enter the physical location of the storage system; for example, Lab 1. b. Owner - Enter the owner of the storage system. c. Contact - Enter any contact information. d. Comments - Enter any relevant notes about the storage system. 6. Click OK. Setting the License 1. In the Management Tree, right-click on the name of the system for which you want to set the license. or In the Main Menu Bar, click Actions > Systems > Set License. The Set License dialog box appears for the selected system. 278 Locating a System