HP 3PAR StoreServ 7200 2-node HP 3PAR Management Console 4.3.1 User's - Page 39
Type of connection Private Loop, Public Loop, or Point-Point.
View all HP 3PAR StoreServ 7200 2-node manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Group Field Node WWN Type Rate Connected Device Type Connected Device Mode Resources Settings State Total Data Throughput Connection Mode Connection Type Configured Rate Max Rate Class 2 VCN Unique Node WWN Interrupt Coalesce Fibre Channel Settings Topology Class Adaptor Type Mode Change Hosts Physical Disks Description Node World Wide Name. Indicates whether the port is FC, iSCSI, RCIP, or RCFC. Rate that data can be transferred over the port (1 Gbps, 2 Gbps or 4 Gbps). When there is no specified value, no connection exists. Type of device that the port is connected to. Free, Disk, Host, Peer, or InServ. Name of device that the port is connected to, e.g. host1, cage0. Port firmware mode setting. Ports in Initiator mode are connected to drive cages and ports in Target mode export to hosts. Suspended mode is for target ports that have not yet been initialized by the system (rare). Peer mode is for Ethernet ports. Current state of the port. The throughput in KB/sec. The type of port connection. Connection type or port connection setting (Loop, Point, or Loop-point). When the port is set to Loop-point, both loop and point-to-point connections are enabled. Data transfer rate setting (for example, 1 Gbps). Auto indicates that the system automatically selects the rate. Maximum rate of connection from the port. Indicates whether Fibre Channel service Class 2 is Disabled, Ack 1 or Ack 0. For fabric attached ports, indicates the VLUN change notification setting. When set to Enabled, notices are generated and sent to the fabric controller. When set to Disabled, no notification is sent. Indicates whether the node's WWN is Enabled or Disabled. Not available for systems running HP 3PAR OS 2.2.4 or lower. If Disabled, each I/O generates a separate interrupt to the HBA port driver rather than generating one interrupt for multiple I/O completion. Not available for systems running HP 3PAR OS 2.2.4 or lower. Type of connection (Private Loop, Public Loop, or Point-Point). Identifies which Fibre Channel classes of service are enabled (2, 3, or 2/3). 2/3 indicates that both Class 2 and Class 3 are enabled. Model of the Fibre Channel adapter that contains the port (for example, QLOGIC 2302). Indicates whether port mode change from initiator to target or vice versa is Allowed or Prohibited. This setting is configured using the HP 3PAR CLI command controlport. The number of hosts connected to the port. This is only displayed if the port is connected to hosts. The number of physical disks connected to the port. This is only displayed if the port is connected to drive cages. Viewing System Ports 39