HP 540 HP 540 Notebook PC HP 541 Notebook PC - Display Replacement Guide - Page 17
CAUTION, Remove the two T8M2.5×7.0 screws
View all HP 540 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
30. Remove the two slotted Torx ST8M2.5×7.0 screws that secure the display assembly to the computer. 31. Turn the computer right-side up, with the front toward you. 32. Open the computer as far as possible. 33. Disconnect the display panel cables (1) and (2) from the system board. 34. Remove the wireless antenna cables (3) from the clips and routing channels built into the top cover. 35. Remove the two T8M2.5×7.0 screws (1) that secure the display assembly to the computer. CAUTION: Support the display assembly when removing the following screws. Failure to support the display assembly can result in damage to the display assembly and other computer components. ENWW Component replacement procedures 11
30.
Remove the two slotted Torx ST8M2.5×7.0 screws that secure the display assembly to the
computer.
31.
Turn the computer right-side up, with the front toward you.
32.
Open the computer as far as possible.
33.
Disconnect the display panel cables
(1)
and
(2)
from the system board.
34.
Remove the wireless antenna cables
(3)
from the clips and routing channels built into the top cover.
35.
Remove the two T8M2.5×7.0 screws
(1)
that secure the display assembly to the computer.
CAUTION:
Support the display assembly when removing the following screws. Failure to support
the display assembly can result in damage to the display assembly and other computer
components.
ENWW
Component replacement procedures
11