HP BL10e HP ProLiant BL e-Class Integrated Administrator User Guide - Page 140

Setting Up the System 4. Type the string. IMPORTANT: Entering a blank string into the Read Community field sets the Read Community to "public." Entering a blank string into the Write Community field disables the SNMP set commands. 5. Click Apply. To enter a read community or write community string using the CLI, enter: SET SNMP COMMUNITY [READ | WRITE] The write must be 0-20 characters long and the read must be 1-20 characters long. Both community names support all alphanumeric characters, the underscore, and the dash characters. The default read community name is "public," and the default write community name is blank. Modifying the System Location IMPORTANT: The SNMP protocol can be disabled in the Network Configuration area of the Web-based user interface. See the "SNMP Configuration" section in Chapter 3, "Web-Based User Interface." To modify the system location information using the Web-based user interface: 1. Click the Enclosure tab. 2. Click SNMP Configuration in the left panel. 3. Set the cursor in the System Location field and type the appropriate information. 4. Click Apply. To modify the system location information using the CLI, enter: SET SNMP LOCATION The field must be 0-20 characters long and supports all the alphanumeric characters, the underscore, the dash, and spaces with quotes. HP ProLiant BL e-Class Integrated Administrator User Guide 5-27