HP BL10e HP ProLiant BL e-Class Integrated Administrator User Guide - Page 91
Set Gateway, <ip, Address>, Ipconfig, Dynamicdns, Static, <netmask>], Set Snmp, Community
UPC - 808736933599
View all HP BL10e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 91 highlights
Command Line Interface Table 4-4: Enclosure Network Configuration Commands continued Command Description Restrictions SET GATEWAY Sets the network default gateway This gateway is only used if the system is configured to use a static IP address. Only enclosure administrators may execute this command. The needs to be in the form where each ### ranges from 0 to 255. SET IPCONFIG [DHCP {DYNAMICDNS } | STATIC ] Sets up the Integrated Administrator IP configuration The gateway and DNS addresses are cleared. The optional DYNAMICDNS argument enables Dynamic DNS. Only enclosure administrators may execute this command. The and need to be in the form where each ### ranges from 0 to 255. SET SNMP COMMUNITY [READ | WRITE] Sets the community name for the read or write SNMP community The default names for the read and write community are "public" and blank, respectively. If a blank write community name is given, SNMP set commands are disabled until a non-empty community name is given. Only enclosure administrators may execute this command. The write must be 0-20 characters long, and the read must be 1-20 characters long. Both include all alphanumeric, the underscore, and the dash characters. The default read community name is "public." The default write community name is blank. SET SNMP CONTACT Configures the name of the system contact The default contact is blank. Only enclosure administrators may execute this command. The must be 0-20 characters long and includes all alphanumeric characters, the underscore, the dash, and the space. If spaces are part of this information, enclose the information in quotes. continued 4-14 HP ProLiant BL e-Class Integrated Administrator User Guide