HP BL10e HP ProLiant BL e-Class Integrated Administrator User Guide - Page 141

Setting Up the System Modifying the System Contact Information To modify the system contact information using the Web-based user interface: 1. Click the Enclosure tab. 2. Click SNMP Configuration in the left panel. 3. Set the cursor in the System Contact field and type the appropriate information. 4. Click Apply. To modify the system contact information using the CLI, enter: SET SNMP CONTACT The field must be 0-20 characters long and supports all the alphanumeric characters, the underscore, the dash, and spaces with quotes. Adding Trap Targets To add a trap target using the Web-based user interface: 1. Click the Enclosure tab. 2. Click SNMP Configuration in the left panel. 3. Type the IP address in the appropriate field of the SNMP area. 4. Click Add. 5. Click Apply. To add a trap target using the CLI, enter: ADD SNMP TRAPRECEIVER The must be in the form where ### ranges from 0 to 255. The Integrated Administrator only supports v1 traps and directs the traps to SNMP port 162 by default. A maximum of eight IP addresses can be added to receive SNMP traps. 5-28 HP ProLiant BL e-Class Integrated Administrator User Guide