HP BL10e HP ProLiant BL e-Class Integrated Administrator User Guide - Page 195

Error Messages Table B-6: Administration Error Messages continued Error Message Cause Please set at least the Primary NTP server before enabling NTP. Attempting to enable the NTP server before enabling the primary NTP server set. is already set as secondary NTP server. Attempting to set the primary NTP server to when the is already set as secondary. is already set as primary NTP server. Attempting to set the primary NTP server to when the is already set as secondary. Primary NTP server is already cleared. Attempting to clear the primary NTP server that has previously been cleared or never set. The secondary NTP server is already cleared. Attempting to clear the secondary NTP server that has previously been cleared or never set. Please set the primary NTP server first. Attempting to set the secondary NTP server without first setting the primary NTP server. Invalid IP address supplied. IP address should be in or format where ### is between 0 and 255 and ## is between 0 and 32. Attempting to set an IP address that is not in the correct format. Invalid e-mail address supplied. Address should be in [email protected] format. Attempting to enter an e-mail address that is not in the correct format. E-mail address is too long. Length must be less than 65 characters. Attempting to enter an e-mail address containing more than 64 characters. Valid Input N/A N/A N/A N/A N/A N/A where ### is between 0 and 255 and ## is between 0 and 32. E-mail addresses formatted "[email protected]" and containing a maximum of 64 characters. E-mail addresses formatted "[email protected]" and containing a maximum of 64 characters. HP ProLiant BL e-Class Integrated Administrator User Guide B-7