HP Brio ba600 HP Brio BA600 PC, User Guide - Page 50
Removing and Replacing the Cover, Removing the Cover
View all HP Brio ba600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Removing and Replacing the Cover Removing and Replacing the Cover Removing the Cover Caution For your safety, disconnect the power cord and all external cables. 1 Place the PC on a flat surface and stand behind it. 2 Disconnect all cables from the rear of the PC. 3 Loosen the three thumb screws from the rear of the PC. 4 Slide the cover back by about 1cm (0.3 inches). 5 Pulling the bottom edges of the cover apart slightly, lift it up and off the PC. 44
44
Removing and Replacing the Cover
Removing and Replacing the Cover
Removing the Cover
1
Place the PC on a flat surface and stand behind it.
2
Disconnect all cables from the rear of the PC.
3
Loosen the three thumb screws from the rear of the PC.
4
Slide the cover back by about 1cm (0.3 inches).
5
Pulling the bottom edges of the cover apart slightly, lift it up and off the PC.
Caution
For your safety, disconnect the power cord and all external cables.