HP Brio ba600 HP Brio BA600 PC, User Guide - Page 57
Replacing a Pentium Processor (BA600 PCs
View all HP Brio ba600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
Replacing a Pentium Processor (BA600 PCs) Replacing a Pentium Processor (BA600 PCs) Caution For your safety, disconnect the power cord and all external cables. 1 Remove the cover. Refer to page 44. 2 Open the side panel of the PC and lay the system board flat. Refer to "Removing the Side Panel for Easy Access to System Board Components" on page 46. 3 Remove the old processor. a Using your nail, pull the retaining tab on one side of the socket outwards to release the processor on one side. b Open the retaining tab on the other side and lift the processor out. retaining tab 4 Install the new processor. Align the processor carefully above the slot, then push the processor down firmly until it clicks into place. 5 Refer to page 48 for instructions on reinstalling the system board in your PC. 6 Replace the PC's cover. Refer to page 45. 51