HP Cisco MDS 9020 Cisco MDS 9000 Family Storage Media Encryption Configuration - Page 222

show fc-redirect peer-switches Appendix A Cisco SME CLI Commands Send documentation comments to [email protected] show fc-redirect peer-switches To display all the peer switches in the fabric running FC-Redirect, use the show fc-redirect peer-switches command. show fc-redirect peer-switches Syntax Description This command has no other keywords or arguments. Defaults None. Command Modes EXEC mode. Command History Release 3.2(2c) Modification This command was introduced. Usage Guidelines This command is used for verifying the fabric state and for troubleshooting. Note To find the switch IP address for the list of switch WWNs, use the show cfs peers command. Examples The following example displays the peer switches in the fabric running FC-Redirect: switch# show fc-redirect peer-switches num Switch WWN State 1 20:00:00:05:30:00:90:9e UP 2 21:00:00:05:30:00:90:9f DOWN 3 22:00:00:05:30:00:90:91 SYNCING 4 23:00:00:05:30:00:90:92 ERROR This table shows FC-Redirect peer switches summaries. Field Up Down Syncing Error Description The peer switch is fully synced with the local switch. The communication with peer switch is broken. The local switch is syncing its configuration with the peer switch. Connection with peer switch is not available. A-34 Cisco MDS 9000 Family Storage Media Encryption Configuration Guide OL-18091-01, Cisco MDS NX-OS Release 4.x