HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 1165

Chapter 61 Configuring RMON Configuring RMON Using Threshold Manager Send documentation comments to [email protected] Managing RMON Events To define customized RMON events using Device Manager, follow these steps: Step 1 Step 2 Choose Admin > Events > Threshold Manager and click More on the Threshold Manager dialog box. Click the Events tab on the RMON Thresholds dialog box. You see the RMON Thresholds Events tab (see Figure 61-6). Figure 61-6 RMON Thresholds Events Tab Step 3 Click Create to create an event entry. You see the Create RMON Thresholds Events dialog box shown in Figure 61-7. Figure 61-7 Create RMON Thresholds Events Dialog Box Step 4 Step 5 Step 6 Step 7 Step 8 Configure the RMON threshold event attributes by choosing the type of event (log, snmptrap, or logandtrap). Increment the index. If you try to create an event with the existing index, you see a duplicate entry error message. Optionally provide a description and a community. Click Create, then close this dialog box. Verify that your event is listed in the remaining RMON Thresholds dialog box. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 61-7