HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 761

Chapter 40 Configuring SNMP Creating and Modifying Users Send documentation comments to [email protected] Enforcing SNMPv3 Message Encryption By default the SNMP agent allows the securityLevel parameters of authNoPriv and authPriv for the SNMPv3 messages that use user-configured SNMPv3 message encryption with auth and priv keys. To enforce the message encryption for a user using Fabric Manager, follow these steps: Step 1 Expand Switches > Security and then select Users and Roles from the Physical Attributes pane. Step 2 Click the Users tab in the Information pane to see a list of users like the one shown in Figure 40-2. Figure 40-2 User Information Under the User Tab Step 3 Step 4 Step 5 Step 6 Step 7 Click Create Row. You see the Create Users dialog box. Enter the user name in the New User field. Select the role from the Role drop-down menu. You can enter a new role name in the field if you do not want to select one from the drop-down menu. If you do this, you must go back and configure this role appropriately (see the "User Accounts" section on page 39-10). Enter a password for the user in Password field. Click the Privacy tab (see Figure 40-3). Figure 40-3 Privacy Tab Step 8 Check the Enforce SNMP Privacy Encryption check box to encrypt management traffic. Step 9 Click Create to create the new entry. To enforce the SNMPv3 message encryption globally on all the users using Fabric Manager, follow these steps: OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 40-5