HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 223

Chapter 7 Fabric Manager Web Server Admin Send documentation comments to [email protected] Step 3 Click Add. You see the Create Collection dialog box shown in Figure 7-43. Figure 7-43 Create Collection Dialog Box Step 4 Step 5 Step 6 Step 7 Step 8 Step 9 Select a fabric for which to collect performance data from the Fabric drop-down list. Either check the VSAN Scope check box to receive notifications for all VSANs, or enter the VSAN IDs in the ID List field to limit the VSANs for which you want to collect performance data. Check the check boxes for the type(s) of entities for which you want to collect performance data. Check the check boxes for the type(s) of thresholds you want to enable. Click Create to add the collection and add it to the table. Repeat Steps 3 through 8 to continue adding roles. Note Performance Manager shows statistics for fabrics that you have configured collections for using the Collection Wizard. To remove a collection using Fabric Manager Web Server, follow these steps: Step 1 Step 2 Step 3 Choose Admin > Configure. Click Collections in the left navigation pane. Check the check box next to the collection you want to remove and click Remove. Configuring Other Statistics To configue other statistics using Fabric Manager Web Server, follow these steps: Step 1 Step 2 Choose Admin > Configure. Click Others in the left navigation pane. You see the Others page as shown in Figure 7-44. OL-8007-10, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family Fabric Manager Configuration Guide 7-47