HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 271

Chapter 12 Initial Configuration Configuring Date, Time, and Time Zone Send documentation comments to [email protected] If the status is OK or active, you can continue with your configuration (see Chapter 19, "Managing Modules"). Configuring Date, Time, and Time Zone Switches in the Cisco MDS 9000 Family use Universal Coordinated Time (UTC), which is the same as Greenwich Mean Time (GMT). To change the default time on the switch with Fabric Manager, follow these steps: Step 1 Step 2 Expand SAN, then select a fabric or a VSAN in the Logical Domains pane. You see a list of switches in the Information pane. Expand Switches and select Clock in the Physical Attributes pane. You see the clock information in the Information pane shown in Figure 12-3. Figure 12-3 Clock Date and Time for Selected Switch Step 3 Step 4 Double-click the time in the ClockDateAndTime field for the switch to change. Enter the date, time, and time zone in the format YYYY/MM/DD-hh:mm:ss ZONE, Where: • YYYY is the year (2002) • MM is the month (08) • DD is the date (23) • hh represents hours in military format (15 for 3 p.m.) • mm is minutes (58) • ss is seconds (09) • ZONE is GMT + or - number of hours OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 12-3