HP Cisco MDS 9124 Cisco MDS 9000 Family Fabric Manager Configuration Guide, Re - Page 525

Chapter 27 SAN Device Virtualization Configuring SDV Send documentation comments to [email protected] Figure 27-5 Creating a Virtual Device i1pwwn i2pwwn i3pwwn i1 i2 i3 SAN Device Virtualization vtpwwn vt1 VT Virtual Device t1pwwn t1 t2pwwn t2 159900 Primary Secondary To configure a virtual target and commit it to the fabric configuration using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Expand SAN in the Logical Domains pane. Then expand the fabric in which your VSAN resides. Expand the VSAN in which you wish to create the virtual target and select SDV. You see the switches in the VSAN that you selected listed in the Information pane. In the Control tab, select enable from the dropdown menu in the Command column to enable SAN device virtualization for a particular switch in the VSAN(see Figure 27-6). Figure 27-6 Enabling SAN Device Virtualization Step 4 Step 5 Step 6 Click the Apply Changes icon to commit the configuration change. Click the CFS tab. Confirm that the SAN device virtualization feature is enabled for the switch. Click the Virtual Devices tab and then click the Create Row icon. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 27-5