HP Cisco MDS 9134 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 276

show spanning-tree bridge Chapter 3 Ethernet Show Commands Send comments to [email protected] show spanning-tree bridge To display status and configuration of the local bridge, use the show spanning-tree bridge command. show spanning-tree bridge [address | brief | detail | forward-time | hello-time | id | max-age | priority [system-id] | protocol] Syntax Description address brief detail forward-time hello-time id max-age priority system-id protocol (Optional) Displays the MAC address for the STP local bridge. (Optional) Displays a brief summary of the status and configuration for the STP bridge. (Optional) Displays a detailed summary of the status and configuration for the STP bridge. (Optional) Displays the STP forward delay interval for the bridge. (Optional) Displays the STP hello time for the bridge. (Optional) Displays the STP bridge identifier for the bridge. (Optional) Displays the STP maximum-aging time for the bridge. (Optional) Displays the bridge priority for this bridge. (Optional) Displays the bridge priority with the system ID extension for this bridge. (Optional) Displays whether the Rapid PVST+ or MST protocol is active. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples This example shows display STP information for the bridge: switch# show spanning-tree bridge Related Commands Command show spanning-tree show spanning-tree active show spanning-tree brief Description Displays information STP. Displays information about STP active interfaces only. Displays brief summary information about STP. 3-22 Cisco Nexus 5000 Series Command Reference OL-16599-01