HP Cisco MDS 9134 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 742
show vsan
View all HP Cisco MDS 9134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 742 highlights
show vsan Chapter 9 Fibre Channel Show Commands Send comments to [email protected] show vsan To display information about configured VSAN, use the show vsan command. show vsan [vsan-id [membership] | membership [interface {fc slot/port | san-port-channel port | vfc vfc-id}] | usage] Syntax Description vsan-id membership interface fc slot/port san-port-channel port vfc vfc-id usage (Optional) Displays information for the specified VSAN ID. The range is 1 to 4093. (Optional) Displays membership information. (Optional) Specifies the interface type. (Optional) Specifies a Fibre Channel interface. (Optional) Specifies a SAN port channel interface specified by the port channel number. (Optional) Specifies a virtual Fibre Channel interface. (Optional) Displays VSAN usage in the system. Command Default None Command Modes EXEC mode. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When you enter the show vsan membership interface command, interface information is displayed for interfaces that are configured in this VSAN. The interface range must be in ascending order and non-overlapping. You can specify a range using a hyphen and several interfaces using commas: • The interface range format for a Fibre Channel interface range is fcslot/port - port , fcslot/port , fcslot/port: For example, show int fc2/1 - 3 , fc2/4 , fc3/2 Examples The following example displays configured VSAN information: switch# show vsan 1 The following example displays membership information for all VSANs. switch # show vsan membership 9-48 Cisco Nexus 5000 Series Command Reference OL-16599-01