HP Cisco MDS 9134 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 706
show fcdomain
View all HP Cisco MDS 9134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 706 highlights
show fcdomain Chapter 9 Fibre Channel Show Commands Send comments to [email protected] show fcdomain To display the Fibre Channel domain (fcdomain) information, use the show fcdomain command. show fcdomain [address-allocation [cache] | allowed | domain-list | fcid persistent [unused] | pending [vsan vsan-id] | pending-diff [vsan vsan-id] | session-status [vsan vsan-id] | statistics [interface {fc slot/port [vsan vsan-id] } | san-port-channel port [vsan vsan-id]] | status | vsan vsan-id] Syntax Description address-allocation cache allowed domain-list fcid persistent pending pending-diff session-status vsan vsan-id statistics interface fc slot/port san-port-channel port status (Optional) Displays statistics for the FC ID allocation. (Optional) Reassigns the FC IDs for a device (disk or host) that exited and reentered the fabric for the principal switch. In the cache content, VSAN refers to the VSAN that contains the device, WWN refers to the device that owned the FC IDs, and mask refers to a single or entire area of FC IDs. (Optional) Displays a list of allowed domain IDs. (Optional) Displays a list of domain IDs provided by the principal switch. (Optional) Displays persistent FC IDs (across reboot). (Optional) Displays the pending configuration. (Optional) Displays the difference between the running configuration and the pending configuration. (Optional) Displays the last action performed by FC domain. (Optional) Specifies a VSAN ID. The range is 1 to 4093. (Optional) Displays the statistics of FC domain. (Optional) Specifies an interface. (Optional) Specifies a Fibre Channel interface. (Optional) Specifies a SAN port channel interface. The range is 1 to 128. (Optional) Displays all VSAN-independent information in FC domain. Command Default None Command Modes EXEC mode. Command History Release 4.0(0)N1(1a) Modification This command was introduced. Usage Guidelines When you enter the show fcdomain with no arguments, all VSANs are displayed. The VSANs should be active or you will get an error. 9-12 Cisco Nexus 5000 Series Command Reference OL-16599-01