HP Cisco MDS 9134 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 674
vsan database
View all HP Cisco MDS 9134 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 674 highlights
vsan database Chapter 8 Fibre Channel Commands Send comments to [email protected] vsan database To create multiple fabrics sharing the same physical infrastructure, assign ports to VSANs, turn on or off interop mode, load balance either per originator exchange or by source-destination ID, and enter VSAN database mode, use the vsan database command. To remove a configuration, use the no command in VSAN database mode. vsan database vsan vsan-id [interface {fc slot/port | san-port-channel port | vfc vfc-id} | interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id} | name name [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}] | suspend [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}] | suspend [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}]] vsan database no vsan vsan-id [interface {fc slot/port | san-port-channel port | vfc vfc-id} | interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id} | name name [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}] | suspend [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}] | suspend [interop [mode] [loadbalancing {src-dst-id | src-dst-ox-id}] | loadbalancing {src-dst-id | src-dst-ox-id}]] Syntax Description vsan vsan-id interface fc slot/port san-port-channel portchannel-number. subinterface-number vfc vfc-id interop mode loadbalancing src-dst-id src-dst-ox-id name name suspend Specifies the VSAN ID. The range is 1 to 4093. (Optional) Specifies the Fibre Channel interface by slot and port number on the switch. Configures the SAN port channel interface specified by the SAN port channel number followed by a dot (.) indicator and the subinterface number. Specifies the virtual Fibre Channel interface. Turns on interoperability mode. Specifies the interop mode. The range is 1 to 4. Configures load-balancing scheme. Sets src-id/dst-id for load-balancing. Sets ox-id/src-id/dst-id for load-balancing (default). Assigns a name to the VSAN. Maximum length is 32 characters. Suspends the VSAN. Command Default None 8-140 Cisco Nexus 5000 Series Command Reference OL-16599-01