HP Cisco MDS 9140 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 190
feature private-vlan, Enables private VLANs.
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
private-vlan association Chapter 2 Ethernet Commands Send comments to [email protected] Isolated and community VLANs can only be associated with one primary VLAN. You cannot configure a VLAN that is already associated to a primary VLAN as a primary VLAN. Note A PVLAN isolated port on a Cisco Nexus 5000 Series switch running the current release of Cisco NX-OS does not support IEEE 802.1q encapsulation and cannot be used as a trunk port. Examples This example shows how to create a private VLAN relationship between the primary VLAN 14, the isolated VLAN 19, and the community VLANs 20 and 21: switch(config)# vlan 19 switch(config-vlan)# private-vlan isolated switch(config)# vlan 20 switch(config-vlan)# private-vlan community switch(config)# vlan 21 switch(config-vlan)# private-vlan community switch(config)# vlan 14 switch(config-vlan)# private-vlan primary switch(config-vlan)# private-vlan association 19-21 This example shows how to remove isolated VLAN 18 and community VLAN 20 from the private VLAN association: switch(config)# vlan 14 switch(config-vlan)# private-vlan association remove 18,20 Related Commands Command Description feature private-vlan Enables private VLANs. show vlan Displays information about VLANs. show vlan private-vlan Displays information about private VLANs. 2-42 Cisco Nexus 5000 Series Command Reference OL-16599-01