HP Cisco MDS 9140 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 682

zone copy Chapter 8 Fibre Channel Commands Send comments to [email protected] zone copy To copy the active zone set to the full zone set, use the zone copy command. Use the no form of the command to negate the command or revert to the factory defaults. zone copy active-zoneset full-zoneset [include-auto-zones] vsan vsan-id zone copy vsan vsan-id active-zoneset {bootflash: | ftp: | full-zoneset | scp: | sftp: | tftp: | volatile:} no zone copy Syntax Description active-zoneset full-zoneset vsan vsan-id bootflash: ftp: scp: sftp: slot0: tftp: volatile: Copies from the active zone set. Copies the active zone set to the full-zone set. Configures to copy active zone set on a VSAN to full zone set. The ID of the VSAN is from 1 to 4093. Copies the active zone set to a location in the bootflash: directory. Copies the active zone set to a remote location using the FTP protocol. Copies the active zone set to a remote location using the SCP protocol. Copies the active zone set to a remote location using the SFTP protocol. Copies the active zone set to a location in the slot0: directory. Copies the active zone set to a remote location using the TFTP protocol. Copies the active zone set to a location in the volatile: directory. Command Default None Command Modes EXEC mode Command History Release 4.0(0)N1(1a) Modification This command was introduced. Examples The following example copies the active zone set to the full zone set: switch# zone copy active-zoneset full-zoneset vsan 1 The following example copies the active zone set in VSAN 3 to a remote location using SCP: switch# zone copy vsan 3 active-zoneset scp://guest@myserver/tmp/active_zoneset.txt Related Commands Command show zone Description Displays zone information. 8-148 Cisco Nexus 5000 Series Command Reference OL-16599-01