HP Cisco MDS 9140 Cisco Nexus 5000 Series Command Reference Release 4.0(1a)N2( - Page 299
fex, Cisco Nexus 5000 Series Command Reference, OL-16599-01, Fabric Extender Commands
View all HP Cisco MDS 9140 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 299 highlights
Chapter 4 Fabric Extender Commands fex Send comments to [email protected] fex To create a Fabric Extender and enter Fabric Extender configuration mode, use the fex command. To delete the Fabric Extender configuration, use the no form of this command. fex chassis_ID no fex chassis_ID Syntax Description chassis_ID Fabric Extender chassis ID. The chassis ID range is from 100 to 199. Command Default None Command Modes Configuration mode Command History Release 4.0(1a)N2(1) Modification This command was introduced. Usage Guidelines You can create and configure the Fabric Extender before you connect and associate it to an interface on the parent switch. Once you associate the Fabric Extender to the switch, the configuration you created is transferred over to the Fabric Extender and applied. Examples This example shows how to enter Fabric Extender configuration mode: switch# configure terminal switch(config)# fex 101 This example shows how to delete the Fabric Extender configuration: switch# configure terminal switch(config)# no fex 101 Related Commands Command beacon description (fex) fex associate pinning max-links serial show fex Description Turns on the locator beacon LED of a Fabric Extender. Specifies a description for a Fabric Extender. Associates a Fabric Extender to an Ethernet or EtherChannel interface. Specifies the number of statically pinned uplinks connected to a Fabric Extender. Assigns a serial number to a Fabric Extender. Displays all configured Fabric Extender chassis connected to the switch. OL-16599-01 Cisco Nexus 5000 Series Command Reference 4-5