HP Cisco MDS 9216 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 148
FICON-5, Cisco MDS SAN-OS Release 1.33.
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message FICON-3-E_INVALID_PA_BRINGUP_FAIL: [chars]. Explanation This port either has an invalid port address assigned or has no port address assigned. Recommended Action Assign a valid FICON port number to the port. Introduced Cisco MDS SAN-OS Release 3.0(1). FICON-5 Error Message FICON-3-E_PORT_PROHIBIT_BRINGUP_FAIL: [chars]. Explanation This port has been prohibited. Prohibiting E or TE ports is not allowed. This port cannot be configured in E mode or TE mode until the prohibit dynamic connectivity mask configuration is changed. Recommended Action Correct the prohibit dynamic connectivity mask (PDCM) for this port to bring it up as an E or TE port in a FICON VSAN. Introduced Cisco MDS SAN-OS Release 1.3(3). Error Message FICON-3-PDCM_CHANGE_REJ_E_PORT: [chars]. Explanation The FICON prohibit dynamic connectivity mask (PDCM) change rejected because an E or TE port is being prohibited. Prohibiting an E or TE port in not allowed. Recommended Action Correct the prohibit dynamic connectivity mask (PDCM) for this port to bring the port up as an E or TE port in a FICON VSAN. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-3-E_UNASSIGN_NO_PN_FAIL: [chars]. Explanation Only port number already assigned can be removed. Recommended Action Check port numbers in the configuration. Introduced Cisco MDS SAN-OS Release 3.0(1). Error Message FICON-5-STARTING: FICON manager process starting. Explanation FICON manager process is being started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.3(1). 2-112 Cisco MDS 9000 Family System Messages Reference OL-15956-01