HP Cisco MDS 9216 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 426
copy running-config startup-config, The system is the binary startup configuration
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 426 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSMGR-5-CFGWRITE_STARTED: Configuration copy started (PID [dec]). Explanation On the active supervisor, this message indicates that the system has started to service a copy running-config startup-config CLI command requested by the user. On the standby supervisor, this message indicates that the system is synchronizing the startup configuration from the active supervisor. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-CONVERT_STARTUP_STARTED: Configuration conversion started (PID [dec]). Explanation The system has started conversion of the startup configuration. This occurs either on system boot or during the course of an upgrade. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-DELETE_BINARY_STARTUP_STARTED: Deletion of binary startup configuration started (PID [dec]). Explanation The system is the binary startup configuration, because of an error in the conversion of the startup conversion. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 2.0(1b). Error Message SYSMGR-5-HANDSHAKE_DONE: Handshake with service "[chars]" successfully performed. Explanation Handshake with the listed service was successful. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-5-HANDSHAKE_FAILED: Handshake with service "[chars]" failed since send failed: [chars] (error-id [hex]). Explanation Handshake with a service failed because system manager could not send handshake response to it. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-390 Cisco MDS 9000 Family System Messages Reference OL-15956-01