HP Cisco MDS 9216 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 400

Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] Error Message SYSMGR-2-CFGWRITE_ABORTED_DIR: Unable to open the configuration directory. Aborting configuration copy. Explanation The destination location for the startup configuration could not be found. Recommended Action If the problem persists, issue the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command. This command will initialize the switch, reset the entire internal disk, and reformat the bootflash: partition. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message SYSMGR-2-CFGWRITE_ABORTED_INIT: Unable to initialize the configuration directory (error-id [hex]). Aborting configuration copy. Explanation An attempt to copy the running configuration to startup configuration has failed because the old data could not be removed. Recommended Action If the problem persists, issue the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command. This command will initialize the switch, reset the entire internal disk, and reformat the bootflash: partition. Introduced Cisco MDS SAN-OS Release 1.3(1) Error Message SYSMGR-2-CFGWRITE_ABORTED_LABEL: Unable to label the new configuration (error-id [hex]). Aborting configuration copy. Explanation An attempt to copy the running configuration to startup configuration has failed because the new startup configuration could not be stamped. Recommended Action If the problem persists, issue the init system CLI command from the switch(boot)# prompt to initialize the configuration partition. Note: This is a disruptive command. This command will initialize the switch, reset the entire internal disk, and reformat the bootflash: partition. Introduced Cisco MDS SAN-OS Release 1.3(1). Error Message SYSMGR-2-CFGWRITE_ABORTED_LOCK: Unable to lock the configuration (error-id [hex]). Aborting configuration copy. Explanation An attempt to copy the running configuration to startup configuration has failed because the system could not lock the required configuration items. Recommended Action If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-364 Cisco MDS 9000 Family System Messages Reference OL-15956-01