HP Cisco MDS 9216 Cisco MDS 9000 Family System Messages Reference (OL-15956-01 - Page 232
MCAST Messages, MCAST-2
View all HP Cisco MDS 9216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
Chapter 2 System Messages and Recovery Procedures for the Cisco MDS 9000 Family Send documentation comments to [email protected] MCAST Messages This section contains the multicast (MCAST) messages. MCAST-2 MCAST-4 Error Message MCAST-2-SHUTDOWN: Process shutting down: [chars]. Explanation The multicast process is shutting down. Recommended Action The action depends on the situation. The multicast process can shut down gracefully because of a system restart (in which case no action needs to take place) or because of a failure. The message associated with the syslog should be self explanatory. If the process can restart properly, there is no immediate harm for the system stability and the suggested action is to report the syslog event together with an explanation of the operations most recently performed on the system. If the component cannot restart properly, contact your support representative. If you purchased Cisco support through a Cisco reseller, contact the reseller directly. If you purchased support directly from Cisco Systems, contact Cisco Technical Support. Introduced Cisco MDS SAN-OS Release 1.2(2a). MCAST-5 Error Message MCAST-4-ERROR: [chars]. Explanation Multicast encountered a generic error. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message MCAST-5-BAD_MSG: Received bad message: [chars]. Explanation Multicast has received a malformed or unrecognizable message. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). Error Message MCAST-5-START: Process has been started. Explanation The multicast process has started. Recommended Action No action is required. Introduced Cisco MDS SAN-OS Release 1.2(2a). 2-196 Cisco MDS 9000 Family System Messages Reference OL-15956-01