HP Cisco MDS 9216A Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 1127

Chapter 57 Configuring SANTap Configuring SANTap Send documentation comments to [email protected] Figure 57-2 SANTap Proxy Mode-2 Example Host initiators VSAN-1 VSAN-10 MDS D V T SAN 1 VSAN-2 Target SSM with SANTap D V T capability VSAN-20 Appliance MDS SAN 2 130078 Configuring SANTap This section includes the following topics: • Enabling SANTap, page 57-3 • Creating a SANTap CVT, page 57-4 • Deleting a SANTap CVT, page 57-4 • Creating a SANTap DVT, page 57-5 • Deleting a SANTap DVT, page 57-6 Enabling SANTap SANTap can be enabled on an entire SSM or it can be enabled on a group of four ports on an SSM. Enabling SANTap on interfaces has the following restrictions: • The fewest number of interfaces that you can enable is four. You can specify fc1 through fc4 but not fc1 through fc2. • The first interface in the group must be 1, 5, 9, 13, 17, 21, 25, or 29. You can specify fc5 through fc8 but not fc7 through fc10. • The groups of four interfaces do not need to be consecutive. You can specify fc1 through fc8 and fc17 through fc20. See "Enabling Intelligent Storage Services" section on page 55-3. In the Create SSM dialog, select SANTap from the Feature drop-down list. OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 57-3