HP Cisco MDS 9216A Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 488

Fibre Channel Domains Chapter 25 Configuring Domain Parameters Send documentation comments to [email protected] Step 1 Step 2 Expand Fabricxx > VSANxx and then select Domain Manager in the Logical Domains pane for the fabric and VSAN that you want to disable fcdomain for. You see the domain's running configuration in the Information pane. Click the Configuration tab and uncheck the Enable check box (see Figure 25-5) for each switch in the fabric that you want to disable fcdomain on. Figure 25-5 Configuring Domains Step 3 Click the Apply Changes icon to save these changes. Setting Fabric Names To set the fabric name value for a disabled fcdomain using Fabric Manager, follow these steps: Step 1 Step 2 Step 3 Expand Fabricxx > VSANxx and then select Domain Manager in the Logical Domains pane for the fabric and VSAN that you want to set the fabric name for. You see the running configuration of the domain in the Information pane. Click the Configuration tab and set the fabric name for each switch in the fabric. Click the Apply Changes icon to save these changes. About Incoming RCFs You can choose to reject RCF request frames on a per-interface, per-VSAN basis. By default, the RCF reject option is disabled (that is, RCF request frames are not automatically rejected). The RCF reject option takes immediate effect to runtime through a disruptive restart (see the "About Domain Restart" section on page 25-3). Rejecting Incoming RCFs To reject incoming RCF request frames using Fabric Manager, follow these steps: 25-6 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x