HP Cisco MDS 9216A Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 593

Chapter 30 Configuring and Managing Zones Zone Sets Send documentation comments to [email protected] Step 3 Select the members you want to add from the Fabric pane (see Figure 30-13) and click Add to Zone or click the zone where you want to add members and click the Insert icon. You see the Add Member to Zone dialog box shown in Figure 30-14. Figure 30-14 Add Member to Zone Dialog Box Note The Device Alias radio button is visible only if device alias is in enhanced mode. For more information, see Creating a Device Alias, page 31-4. Step 4 Step 5 Click the browse button and select a port name or check the LUN check box and click the browse button to configure LUNS. Click Add to add the member to the zone. Note When configuring a zone member, you can specify that a single LUN has multiple IDs depending on the operating system. You can select from six different operating systems. Zone Sets This section describes zone sets and includes the following topics: • About Zone Set Creation, page 30-16 • Activating a Zone Set, page 30-17 • Displaying Zone Membership Information, page 30-19 • About the Default Zone, page 30-19 • Configuring the Default Zone, page 30-20 OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 30-15