HP Cisco MDS 9216A Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 1134

Intelligent Storage Services Chapter 58 Configuring NASB Send documentation comments to [email protected] Enabling Intelligent Storage Services In Cisco MDS SAN-OS Release 2.1(1a) or later, you can provision a subset of the ports for an SSM feature. The port range must be a multiple of four (for example fc4/1 through fc4-12). To enable Intelligent Storage Services for an SSM and provision all ports or a group of ports to use these services using Fabric Manager, follow these steps: Step 1 Step 2 Expand Switches, expand End Devices and then select SSM Features in the Physical Attributes pane. You see the Intelligent Storage Services configuration in the Information pane. Click the SSM tab. You see the set of configured services in the Information pane (See Figure 58-1). Figure 58-1 SSM Configured Services Step 3 Click Create Row to enable a new service on an SSM. You see the Create SSM dialog box shown in Figure 58-2. Figure 58-2 Create SSM Dialog Box Step 4 Step 5 Select the Switch and SSM Card you want to configure. Uncheck the Use All Ports on Card check box if you want to provision a subset of the ports on the card to use this service. 58-2 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x