HP Cisco MDS 9216A Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 969

Chapter 48 Configuring FCIP Using the FCIP Wizard Send documentation comments to [email protected] Caution FCIP write acceleration with FCIP ports as members of PortChannels in Cisco MDS SAN-OS Release 2.0(1b) and later are incompatible with the FCIP write acceleration in earlier releases. Configuring FCIP Write Acceleration You can enable FCIP write acceleration when you create the FCIP link using the FCIP Wizard. You can enable FCIP write acceleration when you create the FCIP link using the FCIP Wizard. To enable write acceleration on an existing FCIP link, follow these steps: Step 1 Step 2 Choose ISLs > FCIP from the Physical Attributes pane on Fabric Manager. You see the FCIP profiles and links in the Information pane. On Device manager, choose IP > FCIP. You see the FCIP dialog box. Click the Tunnels (Advanced) tab. You see the FICP link information (see Figure 48-23). Figure 48-23 FCIP Tunnels (Advanced) Tab Step 3 Step 4 Step 5 Check or uncheck the Write Accelerator check box. Choose the appropriate compression ratio from the IP Compression drop-down list. Click the Apply Changes icon to save these changes. Step 1 Step 2 Choose ISLs > FCIP from the Physical Attributes pane on Fabric Manager. You see the FCIP profiles and links in the Information pane. On Device manager, choose IP > FCIP. You see the FCIP dialog box. Click the Tunnels (Advanced) tab. You see the FICP link information (see Figure 48-23). OL-16184-01, Cisco MDS SAN-OS Release 3.x Cisco MDS 9000 Family CLI Configuration Guide 48-31