HP Cisco MDS 9216A Cisco MDS 9000 Family Fabric Manager Configuration Guide, R - Page 900

Default Settings Chapter 45 Configuring FC-SP and DHCHAP Send documentation comments to [email protected] Step 4 Click the Apply Changes icon to save the updated information. Configuring DHCHAP AAA Authentication You can individually set authentication options. If authentication is not configured, local authentication is used by default. To configure the AAA authentication refer to the Cisco MDS 9000 Family CLI Configuration Guide, Enabling FC-SP on ISLs There is an ISL pop-up menu in Fabric Manager called Enable FC-SP that enables FC-SP on switches at either end of the ISL. You are prompted for an FC-SP generic password, then asked to set FC-SP interface mode to ON for affected ports. Right-click an ISL and click Enable FC-SP to access this feature. Default Settings Table 45-2 lists the default settings for all fabric security features in any switch. Table 45-2 Default Fabric Security Settings Parameters DHCHAP feature DHCHAP hash algorithm DHCHAP authentication mode DHCHAP group default priority exchange order DHCHAP timeout value Default Disabled. A priority list of MD5 followed by SHA-1 for DHCHAP authentication. Auto-passive. 0, 4, 1, 2, and 3 respectively. 30 seconds. 45-10 Cisco MDS 9000 Family CLI Configuration Guide OL-16184-01, Cisco MDS SAN-OS Release 3.x