HP Cisco Nexus 5000 Cisco Nexus 5000 Series Switch CLI Software Configuration - Page 467

Chapter 33 Configuring Domain Parameters Send feedback to [email protected] FC IDs Step 5 Step 6 Step 7 switch(config)# end switch# Assign a new FC ID with a different area allocation. In this example, we replace 77 with ee. switch# configuration terminal switch(config)# fcdomain fcid database switch(config-fcid-db)# vsan 3 wwn 50:05:08:b2:00:71:c8:c2 fcid 0x6fee00 area Enable the HBA interface in the Cisco Nexus 5000 Series switch. switch# configuration terminal switch(config)# interface vfc20/1 switch(config-if)# no shutdown switch(config-if)# end switch# Verify the pWWN ID of the HBA by using the show flogi database command. switch# show flogi database INTERFACE VSAN FCID PORT NAME NODE NAME vfc20/1 3 0x6fee00 50:05:08:b2:00:71:c8:c2 50:05:08:b2:00:71:c8:c0 fc2/3 3 0x6f7704 50:06:0e:80:03:29:61:0f 50:06:0e:80:03:29:61:0f Note Both FC IDs now have different area assignments. About Persistent FC ID Selective Purging Persistent FC IDs can be purged selectively. Static entries and FC IDs currently in use cannot be deleted. Table 33-1 identifies the FC ID entries that are deleted or retained when persistent FC IDs are purged. Table 33-1 Purged FC IDs Persistent FC ID state Static Static Dynamic Dynamic Persistent Usage State In use Not in use In use Not in use Action Not deleted Not deleted Not deleted Deleted OL-16597-01 Cisco Nexus 5000 Series Switch CLI Software Configuration Guide 33-17