HP Color Copier 140/150 (English) Color Copier User's Guide Model 140,145,150, - Page 45

Placement on the page wrong or edges cut off (Continued) Possible Causes Solutions The Paper Size setting on the front panel is set to A4, and letter-size paper is loaded, or the Paper Size setting is set to letter, and A4-size paper is loaded. Check to make sure that Paper Size is set correctly. See "Copy Paper Size" on page 3-9. Auto Fit, Clone, or Poster not working properly Possible Causes Solutions Auto Fit does not enlarge to full size. The Clone feature does not make enough duplicate copies. Poster makes extra, blank pages. ‹ Make sure to place the original in the corner along the two green borders. ‹ Make sure that the scanner glass, lid, and/or automatic document feeder lid are all clean and free from smudges and dust. If there is dirt or a hair on the glass or lid, the copier may misread the size of the image when scanning. See "Cleaning the Glass" on page 7-1. Copies too vivid or bright Possible Causes Color intensity is set too high. Solutions Lower the color intensity. Press the Color Intensity button. Press the Minus (-) button to reduce the color intensity and make your copy paler. The round dot moves to the left on the scale. No copies coming out Possible Causes The copier may be out of paper, or the paper may not be loaded properly. The scanner may be locked. Solutions Load paper in the HP Color Copier using the procedure on page 4-3. A locking mechanism holds and protects the scanner optics during shipment. You must unlock the scanner before you can use the HP Color Copier. See "Step 3 - Unlock Your HP Color Copier" on page 2-4 for instructions. Note: If the scanner is locked, you may hear a loud, grinding, clicking noise when you try to make a copy. HP Color Copier User's Guide 5-7